Publicité
Les langues disponibles
Les langues disponibles
Displaying information
7.10 Setting lock
If the setting lock is deactivated, the PIN must on-
ly be entered when acknowledging safety-rele-
vant faults.
* Safety settings
1.
or
2. Activating/deactivating the setting lock:
■
Activate
or
Activate the setting lock.
■
Deactivate
or
Deactivate the setting lock.
7.11 Recalibrating
If the position or length of the boundary cable has
been changed or the appliance no longer finds
the boundary cable, recalibration is necessary.
Reset calibration
1.
or
2. Reset loop calibration data?
3. Carrying out a calibration movement: see
chapter 5.4 "Carrying out an automatic cali-
bration movement", page 49.
7.12 Restoring factory settings
The factory settings of the appliance can be re-
stored, e.g. before selling the appliance.
* Factory reset
1.
or
Appliance reports: Factory reset com-
pleted
8 DISPLAYING INFORMATION
The Information menu is used for displaying
machine data. No settings can be made in this
menu.
1. Call up the main menu with
* Information
2.
or
3. Select the menu item with
cept with
.
Note: The menu items are described in the
following sections.
4. Return to the main menu with
Blades service
Shows in how many operating hours a blade ser-
vice is required. The counter can be reset manu-
ally. Have the blade service carried out by an AL-
KO dealer, technician or service partner.
Reset the counter for blade service:
Confirm
1.
or
495439_a
Hardware
Shows information on the appliance, such as
type, year of manufacture, operating hours, serial
number, number of mowing operations, total
mowing time, number of charging cycles, total
charging time, length of the loop of the boundary
cable.
Software
:
Shows the software version.
:
automatic lawn mower up to date at all times.
Check the firmware version at regular intervals
and update it as necessary. The Robolinho up-
dater software can be found on the Internet at:
www.al-ko.com/shop/de/robolinho-autoupdater
Program Info
Shows current settings such as the total weekly
mowing time.
Failures
Shows the fault messages that last occurred with
date, time and fault code.
9 MAINTENANCE AND CARE
and moving appliance parts can lead to injury.
■
9.1
IMPORTANT! Danger from water. Water in
the automatic lawn mower and in the base station
leads to damage on electrical components.
■
.
Clean the automatic lawn mower
or
and ac-
cutting blade. The cutting blades are very sharp
and can cause cutting injuries.
■
■
.
Once a week, carry out the following:
1. Switch off the appliance with
2. Wipe off the surface of the housing with a
NOTE Keep the software of the Robolinho
CAUTION! Risk of injury. Sharp-edged
Always wear protective gloves during mainte-
nance, care and cleaning work.
Cleaning
Do not spray the automatic lawn mower and
base station with water.
CAUTION! Danger of injury due to the
Wear protective gloves.
Make sure that parts of the body do not get
into the cutting blade.
broom, a brush, a damp cloth or a fine
sponge.
.
53
Publicité
