Miele PDW 909 Schéma D'installation page 42

en - Installation notes
Tumble dryer ac-
cessories
Communication
box
Peak load / energy
management
Payment device
XKM 3200 WL PLT
42
The optional communication box allows external hardware from Miele
and other suppliers to be connected to the Miele Professional ma-
chine.
The communication box is supplied with mains voltage by the Miele
Professional machine.
The separately available set consists of the communication box and
fasteners for installation on the machine or on the wall.
A peak-load or energy management system can be connected via the
communication box.
The peak-load negotiation monitors the energy consumption of a
system and deactivates individual pieces of equipment temporarily
in order to ensure that certain total load limits are not exceeded.
Monitoring is externally controlled.
When the peak-load function is activated, the heating is deactivated
and the programme stopped. A message appears in the display to in-
form you of this.
The programme is resumed automatically when the peak-load func-
tion finishes.
Using the communication box, the tumble dryer can be fitted with an
individual payment system as an optional accessory.
The programming required for connecting a payment system can be
carried out during the initial commissioning process. After initial com-
missioning, changes may only be carried out by your Miele dealer or
the Miele Customer Service Department.
The optional Miele communication module can be used to establish a
data connection between a Miele Professional machine and a data
processor in accordance with the Ethernet or WiFi standard.
This communication module fits into the communication slot which is
a standard feature on all machines. The communication module of-
fers the option of intelligent app-based communication with external
systems (such as central smart payment terminals or payment sys-
tems). In addition, it can display detailed machine and programme
status information.
This module forms the basis for wired communication with
Miele MOVE.
It is not possible to integrate the machine into the "Miele@home"
app for domestic installations.