Connection Diagram - Mediclinics M09A-UL Manuel D'installation Et D'utilisation


Clean the casing using a damp cloth moistened in a solution of neutral soap and water.
After cleaning the entire surface rinse the soap from the casing using another cloth
moistened in water and dry using a dry cloth.

Close the hand dryer by assembling the casing once more, tightening the screws that
fix the casing to the base and connect to the power grid.

Start the hand dryer up 2 or 3 times in a row to ensure that all remaining dust is
extracted.
ATTENTION: Take care at all times not to damage any component of the hand

CONNECTION DIAGRAM

DANGER.
Electric shock
risk
dryer.
- The installer must make sure that the electric system is
grounded in accordance with the law in force.
- Make sure that the electric system has a high-sensitivity
breaker I n ≤ 0.03 A.
- Make sure the machine is disconnected from electric
power supply, before performing maintenance operation.