Miele professional PW 6107 Mode D'emploi page 34

Installation Instructions
Removing the shipping struts
Four shipping struts, two at the front and two at the
rear, are each fixed with 3 hex screws.
^ Remove the shipping struts at the installation location
before using the washer.
^ Take off the front and back panel of the machine by
removing the screws at the bottom edge of the
front service panel and the screws in the rear panel
and remove.
Save the shipping struts for future use. They must be
refitted if the machine is moved.
Do not move the machine without all of the outer
panels in place.
34
All manuals and user guides at all-guides.com