Miele professional PW 6107 Mode D'emploi page 21

Peak load cut off
When activating the peak load cut off the heat is
turned off and the program is stopped. The display
shows:
1 Hot Wash
Program stop - Peak load function
Program will continue.
i
When the peak load function ends the program will
continue automatically.
Communication module
The communication module makes it possible to
connect the machine to a PC (Personal Computer).
The outlet for the module is on the back of the
machine.
This requires a special Editor Program which is
available from the Miele Professional Department.
Operating data
By pressing the \ "Operating data" button the
operating data module can be used to read or delete
operating data either before the start of a program, or
after it has finished.
1 Hot Wash
2 Cottons
3 Cottons Intensive
\
i
After pressing the \ button the following will
appear.
Operating data module
Total data
Program data
\
Selection choice:
– Total data
In this option all program data is collated and
summarized.
– Program data
Program data contains all the data called up during a
program.
– Delete data
– Module (Total data including program data)
– Total data (only delete total data)
– Program data (only delete program data)
Pressing the button again deselects the \
"Operating data" option..
All manuals and user guides at all-guides.com
f
194 °F
140 °F
140 °F
FC A
e
A
If there is no more memory available in the operating
data module a message will appear after pressing
the "START" button to say that the operating data will
be overwritten.
If you press the A "Back button or do not press the
"START" button within 30 seconds the display will
revert to the way it was before starting the program.
Total data
Operating data module
Total data
Program data
\
After selecting Total data the following (example) will
appear in the display:
Operating data module ~ Total data
Total time power on: 20,987 h
Operating hours: 123456 h
\
Other options:
Total time power on: 200,987 h
Operating hours: 123,456 h
Duration heating active: 73,456 h
Duration drive motor active: 93,456 h
Program starts: 23,456
Program stops: 567
Program cancellations: 67
Water volume: 1,234,567 l
Amount of laundry: 1,234,567 kg
Liquid agent: 2,345 l
Energy: 12,345,678 kWh
Optional Module
e
A
e
A
21