Publicité
Les langues disponibles
Les langues disponibles
B
Picture Menu
● ABrightnessB, AContrastB, AColorB, ATintB and ADetailB can
also be adjusted outside the OSD menu. Press the
[BRIGHTNESS] button on the remote control, followed by
the number buttons to enter a setting value.
Input
Picture
Brightness
Contrast
Color
Tint
Detail
Adv Color
.................................................................................................
Brightness Button
Adjusts the brightness of the picture image.
Setting Values: 0-100
Default Value: 50
● Adjustment is also possible by pressing the
[BRIGHTNESS] button on the remote control. Press the
[BRIGHTNESS] button, followed by the number buttons to
enter a setting value.
.................................................................................................
Contrast
Adjusts the contrast of the picture image.
Setting Values: 0-100
Default Value: 50
.................................................................................................
Color
Adjusts the color density of the picture image.
Setting Values: 0-100
Default Value: 50
Display
Patterns
50
50
50
50
4
Normal
.................................................................................................
Tint
Adjusts the hue of the picture image.
Setting Values: 0-100
Default Value: 50
● Adjust this when the colors in the video image do not seem
balanced under the current tint settings.
● This item cannot be adjusted for component (YPrPb)
signals.
.................................................................................................
Detail
Adjusts the image quality.
Setting Values: 0-15
Default Value: 4
● Select your preferred setting values according to the
image to be viewed.
.................................................................................................
Adv Color (Advanced Color System)
For some DVDs with computer animation or with very
high levels of color, the chroma edge processing circuits
may not be needed and this can be set to
AOFF(Bypass)B. For most sources, the ANormalB setting
should be selected.
Setting Values: Normal, Bypass
Default Value: Normal
NOTE:
The menus below will not function if ASET: 1080i TO
1080pB is set to AHIGH BANDWIDTH MODEB.
● Aspect
● Tint
● Detail
● Adv Color (Advanced Color System)
● Display
27
Publicité
