Publicité
Les langues disponibles
Les langues disponibles
.................................................................................................
SET: INPUT HD H-ADJUST
(Horizontal position of HD signals)
Aligns the horizontal position of normal video images to
high quality images (720p/1080i).
Setting Values: 0-50
Default Value: 25
● Aligns an appropriate image size with the image position
on the screen by using test patterns from the DVD.
Adjustment is first performed at the AH/V-PositionB
position of the OSD menu on this unit. This is followed by
the actual adjustment using the HD signals.
.................................................................................................
SET: DVI INPUT LEVEL
(Setting for DVI digital input signals)
Sets the signal level of DVI input signals.
Setting Values: 16-235, 0-255
Default Value: 0-255
● Sets to match the signal level of your input device.
.................................................................................................
SET: VIDEO INPUT
(Input setting for composite video signals)
Sets whether to use the video input terminal or not.
Setting Values: ENABLE, DISABLE
Default Value: ENABLE
● When this is set to ADISABLEB (do not use), the AVideoB
item cannot be selected for AINPUTB in the OSD menu.
● It is not possible to set all terminals to ADISABLEB (do not
use). ASET: VIDEO INPUTB will be automatically set to
AENABLEB
(use) upon doing so.
.................................................................................................
SET: S-VIDEO INPUT
(Input setting for S-video signals)
Sets whether to use the S-video input terminal or not.
Setting Values: ENABLE, DISABLE
Default Value: ENABLE
● When this is set to ADISABLEB (do not use), the AS-VideoB
item cannot be selected for AINPUTB in the OSD menu.
.................................................................................................
SET: RGB INPUT
(Input setting for RGB signals)
Sets whether to use the RGB input terminal or not.
Setting Values: ENABLE, DISABLE
Default Value: ENABLE
● When this is set to ADISABLEB (do not use), the ARGBB
item cannot be selected for AINPUTB in the OSD menu.
.................................................................................................
SET: YCrCb INPUT
(Input setting for component video signals)
Sets whether to use the component video input terminal
or not.
Setting Values: ENABLE, DISABLE
Default Value: ENABLE
● When this is set to ADISABLEB (do not use), the AYCrCbB
item cannot be selected for AINPUTB in the OSD menu.
.................................................................................................
SET: DVI INPUT
(Input setting for DVI digital signals)
Sets whether to use the DVI input terminal or not.
Setting Values: ENABLE, DISABLE
Default Value: ENABLE
● When this is set to ADISABLEB (do not use), the ADVIB
item cannot be selected for AINPUTB in the OSD menu.
.................................................................................................
SET: PASSTHRU INPUT
(Pass-through input setting)
Sets whether to use pass-through or not.
Setting Values: ENABLE, DISABLE
Default Value: ENABLE
.................................................................................................
SET: RGB INPUT SYNC
(RGB sync signal setting)
Sets the sync signal during RGB signal input.
Setting Values: SYNC ON GREEN, COMPOSITE SYNC
Default Value: SYNC ON GREEN
● This setting is enabled when RGB input is selected.
● Select ACOMPOSITE SYNCB for PAL RGB signals.
23
Publicité
