Publicité
Les langues disponibles
Les langues disponibles
Installation and Connection
Precautions for Installation
Please read the following carefully when installing this unit.
Installation Environment
This unit is a precision device. Do not install it at the following places. Doing so may cause fire or malfunction of
the unit.
● Where there is water, humidity or dust
● Where the unit may be subjected to oily or cigarette smoke
● On a soft surface such as carpet or cushion
● Where the unit may be subjected to high temperature due to direct sunlight
● When temperature is high or low
Check that it is well ventilated before installing on a rack. When devices that emit heat, such as power amplifiers, are to
be installed on a rack, mount a fan on the rack as well.
Allowable operation temperature range: +5 f to +35 f
Allowable relative humidity range: 20 % to 80 % (no condensation)
Allowable storage temperature range: -10 f to +60 f
● Any room in which there is cigarette smoke or grease
Even where smoke and grease levels are minimal, prolonged exposure will affect this unit and may cause
malfunctioning.
Minimum Space Required
30 mm and above
100 mm and above
100 mm and above
30 mm and above
100 mm and above
● Do not place this unit in an enclosed area or block the
air inlets and exhaust vents. Allow sufficient space
around this unit for emission of heat.
● Check that it is well ventilated before installing on a
rack.
When devices that emit heat, such as power
amplifiers, are to be installed on a rack, mount a fan on
the rack as well.
15
Publicité
