Favero Electronics INOUT-4 Mode D'emploi page 3

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

memory location, from 1 to 6.
To recall a stored player substitution just press the
wanted number, from 1 to 6.
If you want to reset all 6 memories, keep pressed
the "zero" key for 3 seconds.
3
B
ATTERY
The INOUT is powered by a 12V 2A internal sealed
lead-acid rechargeable battery.
To recharge the battery only use the battery
charger provided; the connector for connecting
the battery charger is located on the lower side of
the INOUT.
To check the level of the battery, hold down the
[BATTERY LEVEL] key for several seconds: on
the keyboard display a value between 0 and 4 will
appear with the following correspondences:
level 4: battery charged to nearly 100%;
level 3: battery charged to nearly 75%;
level 2: battery charged to nearly 50%;
level 1: battery charged to nearly 25%;
level 0: battery empty.
Recharge the INOUT at the end of each use, or
when the battery level is less than 2.
Do not let the battery empty completely as this
causes it to deteriorate.
If the INOUT is not used for a long period of
time, recharge the battery every six months.
In the case that the battery needs to be
replaced, it should be done so by a
qualified technician.
The disposal of batteries should be made
only in designated areas (shops or public
buildings) indicated for such types of
disposal.
The battery can be purchased from the supplier of
the INOUT as spare part (art. 290-26).
Battery life: see paragraph 1.2.
4
C
OMPLIANCE WITH
The INOUT meets the necessary requirements for
electromagnetic
Compatibility
regarding
electronic
European directives:
• 2004/108/EC of 15 December 2004
• 2006/95/EC of 12 December 2006
5
D
ISPOSAL OF PRODUCT
Please dispose of your product in a manner most
compatible with the environment and in accordance
with federal or state laws, reusing parts and
F
E
D
AVERO
LECTRONIC
ESIGN
EC
REGULATIONS
and
Security
equipment,
according
recycling components and materials when possible.
When this crossed-out waste bin symbol is
attached to a product it signifies the product
should be disposed of in a separate
container from other waste. The sorted waste
collection of the present device is organized and
managed by the manufacturer. Users who wish to
dispose of their present device should contact the
manufacturer and follow the procedure indicated for
separate waste collection. Ensuring proper sorted
waste collection, in accordance with environmental
standards, for the disposal of further devices helps
to protect the environment and the health of
persons from any damaging effects. It also favors
the reuse and recycling of materials. Administrative
sanctions, in accordance with regulations in effect,
will be applied for any improper or abusive disposal
of the product on part of the holder.
to
Pag. 3 / 12
00290-M01-04-ML - User Manual INOUT-4-8
ENGLISH

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Inout-8290-04290-08

Table des Matières