Publicité
Les langues disponibles
Les langues disponibles
Fitting the hose connection (B - mobile use)
Remove the pressure pipe connection (two screws).
Fit the hose connection adapter.
Position the submersible pump firmly on a level surface.
Heed the switch-on level of the pump. (1)
Take residual water into account. (2)
Deep extraction (option for mobile use)
Proceed as follows to extract water down to a residual level
of 20 mm:
Pull the intake cage off and store it.
Connecting the mains connection/commissioning
Plug in the mains plug.
Pump starts up automatically (with corresponding level).
Check whether the pressure pipe is still firmly connected
after the pump has started running.
Carry out a functional test (see "Maintenance",
page 23).
22 / 52
016-211_01
Publicité
