VINCENT SV-227MK Manuel D'utilisation page 37

CONNECTION OF SOURCE DEVICES OVER
The integrated D/A converter makes it possible to receive also digital audio signals via an optical and/or
coaxial cable and to transmit them analogously to the amplifier. Here, the "Optical IN" and "Coaxial
IN" (15) connections serve as input.
Digital audio source with optical signal connection
SV-227MK
Digital audio source with coaxial signal connection
SV-227MK
This device is equipped with a switch (17) that can be used to change the country-specific voltage from
230 V to 110 V.
Please never actuate the switch during operation! The voltage must only be switched by a techni-
cian, since the device fuse must also be replaced after actuation of the switch! Information about
the device fuse can be found on the back of the device.
Unauthorised actuation of the switch will void any warranty claim!
OPTIC L IN
Optical digital cable
SWITCHING THE VOLT GE
ND CO XI L IN
DIGITAL OUT
Coaxial Digital cable (RC )
DIGITAL OUT
DVD, SACD, CD,
TV/Radioreceiver
DVD, SACD, CD,
TV/Radioreceiver
Vincent
37