VINCENT SV-227MK Manuel D'utilisation page 35

CONNECTION OF A RECORDING DEVICE
If you want, you can use the RCA sockets "REC OUT" (13) on the back of the appliance to connect an ana-
logue stereo recording device (e.g. CD recorder, cassette recorder etc.) or another appliance that is intended
for receiving the unchanged, fixed stereo output level (line level) from the signal source selected on the amplifier
at any given time. The output level is independent from the volume setting but reacts to the "MUTE" command.
The output level is independent from the volume setting, the Loudness function, the tone settings (BASS, TREBLE,
TONE), the position of the speaker switch (4) and the plugging-in of the headphones (10).
SV-227MK
1 2
RCA connection
e.g. tape recorder
LINE IN
Connect this signal output to the signal input ("LINE IN", "TAPE IN" oder "REC IN") on the recording appli-
ance using RCA cables. Please note that some recording equipment can have a slightly detrimental effect
on the audio signal quality. Some recording devices have rather low input impedance, which can slightly
alter the input signal voltage. For maximal music enjoyment we recommend that you connect to the "REC"
terminal only for as long as the recording is actually being made.
Vincent
35