Publicité
Les langues disponibles
Les langues disponibles
4. Operation
4.1. Selecting a language
You can select a language by pressing the button
once or more. The languages available
are German, English, French and Italian. The language can be changed regardless of the
operating status.
After 2 seconds the device automatically returns to where it was when the language selection
procedure was called up (Normal display, test or parameter menu).
Example of display when selecting a language:
4.2. Testing mode
Pressing the
once switches the heating timer on for 30 min. The display indicates the
time remaining, the software version number and the status of the heating output. The test
mode can be selected at any stage. It should however be remembered that any heating
periods underway will be interrupted. So for example, selecting the test mode will interrupt
the post-heating period.
The test finishes once the test time has elapsed, but can also be terminated by pressing the
button while the test is still underway. When the test mode has been terminated the
device will return to the standard display.
Display in test mode (example):
4.3. Operation of the parameter menu
The parameter menu can be called up by pressing the
button. The parameter displayed
may be modified using the
and
buttons. If
the buttons are pressed down for an extended period the value changes automatically
(autorepeat function).
Having confirmed the set value using the
button, the display changes to the following
parameter.
Having confirmed the final parameter, the device goes back to the standard display. You can
also exit the parameter entry by pressing the
button.
Pressing
and
down at the same
time will reset the parameter to the default setting.
The following menu points can be set or called up:
6
Publicité
