Publicité
Les langues disponibles
Les langues disponibles
User Settings
These settings control and edit all the basic functionalities. Touch once to display the shortcuts. Press on each icon to access
the parameters.
Language. Select the language.
EN
Brightness. Adjust the brightness and enable or disable the screen brightness when the screen saver is active.
EN
Date and time. Press on the clock to set the time and the format type (12 or 24 hours). Press on the calendar to set the
date. Installations with webserver enable automatic time change.
FR
Information. This parameter provides information on:
•
Zone: firmware, zone, association, actuator or status of the communications.
IT
•
System: firmware, settings and information about the system controllers.
•
Devices: It displays the elements connected to the system.
•
Webserver (Only for system 1 Main controller): firmware, IP address, gateway, MAC and PIN.
PT
•
Warnings and errors on system.
DE
Clean screen: Select this option to clean the screen. The touch screen will lock for a few seconds.
Zone Settings
Press on the icons to access the parameters.
Timer. It is an auto power-off timer of the zone:
Off. Timer is not activated.
30. It activates the timing and switches off the zone after 30 minutes.
60. It activates the timing and switches off the zone after 60 minutes.
90. It activates the timing and switches off the zone after 90 minutes.
Heating stages. The available parameters are:
Air: Only uses air stage.
Radiant: Only uses radiant air.
Air+Radiant: The system combines both stages to reach comfort quickly and efficiently.
Note: For security reasons, the zone will turn off after changing any setting.
Lite Settings. To save energy, enables to configure the wired Airzone Lite to switch off after a few seconds.
Note: To access the Lite settings, go to a zone controlled by a wired Lite controller through the zone navigation menu.
10
Publicité
