Publicité
Les langues disponibles
Les langues disponibles
Standard. Default setting. The system automatically regulates the fan speed based on the number of zones calling for
cooling or heating.
Power. The fan speed is higher than in standard mode to increase the flow.
Fan Speed
This parameter is only available in zones with individual units. It is used to set the fan speed of the AC unit fan. The fan speed is
set in automatic speed by default.
High speed
Local Ventilation
This option enables the activation
cooling or heating any of the zones.
ADVANCED USE OF THE BLUEFACE ZERO CONTROLLER
Zone Navigation
From the main screen press on the name of the zone, a list with all the zones and their status will be displayed. This screen
enables the control of all the zones at the same time or individually, it is also possible to switch on/off the zones from this
screen, press < and > to see the rest of the zones.
Access to all the zones
Access to the zone
Room temperature
of the zone
The "All zones" option gives access to the control of all the zones at the same time, broadcasting the changes to all of them.
Press on the zone's name to access to all the parameters of the zone and control them from your controller. When the system
detects a temperature error on a specific zone, the zone displays the error code instead of the room temperature (see section
Warnings and errors).
Medium speed
Low speed
or deactivation
of the ventilation in the selected zone when the system is not actively
Automatic speed
Turn on/off
all the zones
On/Off of the zone
Set point temperature
of the zone
EN
EN
FR
IT
PT
DE
9
Publicité
