Publicité
Les langues disponibles
Les langues disponibles
LITE CONTROLLER
Temperature setting:
lower temperature
On/Off. Turns On and Off the zone. In addition, it indicates the operation mode with color codes.
Temperature Settings. Allows adjustment of the base set point temperature in increments of ± 1˚ C/2˚ F up to a limit of ± 3˚
C/6˚ F. This base set point temperature can be configured by any Blueface zero Controller.
Important: After 10 seconds of inactivity, the Wireless Lite Controller will turn off the LEDs to save battery. The first press on
displays de status of the zone (On/Off, Operation Mode and Set Point Temperature). This pulsation enables the modification
of the desired parameters (On/Off or Temperature).
USE OF THE LITE CONTROLLER
Adjusting the temperature
On/Off. Press the On/Off button to turn on or off the zone. This button also displays the operation mode. It follows a color
code system:
Purple: Stop User mode.
Red: Heating mode/Emergency heat.
Blue: Cooling and Dry mode.
Green: The set point temperature has been reached.
If the button remains solid, the controller is ON.
If the button is blinking, the controller is OFF.
The button remains solid for 10 seconds to show the status, then turns off.
Temperature Control. Raise or lower the base set point temperature configured by any Blueface zero Controller (through
remote zones on the Lite settings parameter) in increments of ± 1˚ C/2˚ F up to a limit of ± 3˚ C/6˚ F using the buttons.
The LEDs indicate the steps above or below the base set temperature.
Once the three-step limit has been reached, the temperature control icons will blink.
On/Off
Temperature setting:
raise temperature
EN
EN
FR
IT
PT
DE
17
Publicité
