Publicité
Les langues disponibles
Les langues disponibles
THINK CONTROLLER
MAIN SCREEN DISPLAY
EN
Operation Mode
EN
Zone/ Current Room
Temperature/ Relative
FR
humidity
Setting parameters
IT
Zone demand
PT
Local ventilation
DE
Home screen/ Heating
or Cooling Set Point
temperature
Navigate through the Think Controller by pressing the side buttons on the control bars.
Operation Mode. Displays the operation mode selected from the Main controller: Cool, Heat, Auto and Emergency Heat
(depending on the installation). Direct expansion systems include Dry mode.
User Mode. Displays the User Mode selected from the Main controller: Eco, Vacation, Stop, Comfort, Unoccupied or Night Time.
Airflow. Depending on the installation, displays the Airflow Control selected from the Main controller: Silence, Standard or
Power.
Fan speed. Depending on the installation, sets the operating speed of the AC unit fan: Low, Medium, High and Automatic.
Zone. Displays the current zone.
Current Room Temperature. Displays the current temperature in the room where the Think controller is located.
Note: The range of measured room temperature goes from 10˚ C/50˚ F to 35˚ C/90˚ F, if the room temperature is out of these limits,
the temperature will be displayed as < 10˚ C/50˚ F or > 35˚ C/90˚ F.
Relative humidity. Indicates the relative humidity of the zone.
Control Bar. Adjusts (by pressing or by sliding) all the parameters controlled by the Think Controller.
Note: Press once to adjust the set point temperature by a single degree. Slide to adjust the set point temperature in larger steps.
Setting Parameters. Press to access to Mode, User mode, Airflow control, Local ventilation, Timer, Heating stages and
Information parameters.
Current Set Point. Displays the temperature set point from the Think Controller control bar.
Zone Demand. This icon will be displayed if the zone is calling for demand.
Local Ventilation. Displays if the local ventilation is activated or deactivated.
Timer. Automatically switches off the zone after 30, 60 or 90 minutes.
On/Off. Turns On and Off the zone where the controller is located.
Airzone. Button used to confirm, return to home screen and to switch between the heating set point and cooling set point.
12
User Mode
Airflow
Control bar
Current Set Point
Timer
On/Off
Publicité
