Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
PAGE HEAdER.....
PROBLEM
Blades don't turn when
processing.
Unable to lock lid
into place.
Gear box in lid jumps out
of lid when processing.
Mashing leg leg won't
attach onto mashing leg
gear box.
Blades won't remove
from mashing leg.
Shredding disc slows
down when in use.
Processing bowl does not
sit flat on storage base.
Motor sounds like it is
not able to process load.
All manuals and user guides at all-guides.com
SOLUTION
•
May be too much food in bowl; reduce quantity.
•
Pieces of food, such as meat are too large, reduce size.
•
Spindle may be out of position. Remove lid, straighten
spindle as vertical as possible and reposition lid.
•
Food may stuck underneath the S Blade™ preventing the
lid from being locked into place. Food such as nuts can
be loaded through the feed chute.
•
Replace gear box and ensure that the control grip is
held vertically and firmly.
•
Ensure mashing leg and gear box arrow graphics are
vertically aligned. Twist mashing leg counterclockwise
to lock for use.
•
Mashing leg should still be assembled to the gear box
assembly and to the unplugged motor body.
Rotate blades clockwise.
•
Shredding has exceeded Max level. Empty bowl and
continue to shred.
•
Too much force is being used when shredding. Reduce
force when pushing.
•
Ensure adjustable slicing disc is set to 'Storage Position'
•
Speed may not be correct. Refer to processing guide for
correct speeds.
25
Publicité
