Télécharger Imprimer la page

Eurocave V-LAPREMIERE-L Mode D'emploi page 13

Masquer les pouces Voir aussi pour V-LAPREMIERE-L:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
1/ DESCRIPTION OF YOUR WINE CABINET
A
B
C
D
E
F
G
M
H
I
P
J
A
Cabinet body
B
Setting and control panel
C
Lighting (2 LEDs)
D
Breather hole + Active charcoal filter
E
Door catch
F
Cabinet body stiffener, large model only - do not remove
G
Multi purpose shelf
H
Grill
24
GB
O
N
L
K
I
Humidity cartridge - 1-temperature model only
J
2 adjustable feet for levelling
K
Lower hinge (x2)
L
Product identification label
M
Fresh air vent
N
Door (fitted with a dual-action lock)
O
Upper hinge
P
Condensate collection tray with outlet hole
2/ POWER SUPPLY
2/ POWER SUPPLY
The wine cabinet's power lead has a plug, to be plugged into a standard earthed outlet to prevent
any risk of electric shock.
Contact your usual EuroCave retailer to change the power lead if it is damaged. It must be replaced
by a EuroCave original manufacturer's part.
3/ PROTECTING THE ENVIRONMENT / ECO-DESIGN
3/ PROTECTING THE ENVIRONMENT / ECO-DESIGN
Spare parts for our appliances
Recycling: a caring gesture
are available for 11 years. For
Electrical and electronic equipment can have a
further information, contact
harmful effect on the environment and human
your EuroCave stockist. For
health owing to the presence of hazardous
France, contact our customer
substances.
service department. Contact
You should never therefore trash electronic and
details at www.eurocave.com
electrical equipment with unsorted municipal
waste.
When purchasing a new EuroCave product, you
Disposal of packaging
can entrust recycling of your old appliance to
your EuroCave retailer.
All packaging used by EuroCave is made from
Speak to your EuroCave retailer. He will explain
recyclable materials.
the removal and collection arrangements set up
After unpacking your cabinet, take the packaging
in the EuroCave network.
to a refuse collection point. For the most part, it
In compliance with legislation relating to
will be recycled.
protecting and caring for the environment,
4/ INSTALLING YOUR WINE CABINET
• When your cabinet is delivered, check the outside for signs of damage
(impact, warping...).
• Open the door and check that the various elements inside are intact
(walls, Main du Sommelier supports, hinges, bottle support...).
• Remove the protective elements found inside and outside your cabinet
including the lower hinge protector (see diagram (1))
• Fit the cap (see diagram 2), found in the accessories bag, used for sealing
the hole in the lower hinge.
1
2
• Protective wedges for transportation have been attached to each shelf.
2 wedges per shelf (Picture 1). Remove all of them using a rotating
movement (Picture 2). You can retain these wedges and reuse them if
you have to transport your wine cabinet over a long distance.
Have the power supply socket checked by a qualified electrician who will check that it
is correctly earthed and will carry out, if necessary, work to ensure that the socket
complies with current standards.
If you are moving to a foreign country, check that the supply characteristics of the
cabinet correspond to the country (voltage, frequency).
your wine cabinet does not contain C.F.C.s or
H.C.F.Cs.
To save energy
• Install your wine cabinet in a suitable
location (see following page) and observe the
recommended temperature ranges.
• Keep the door open for as short a time as
possible.
• Ensure that the door seal is in good working
order and that it is not damaged. If it is,
contact your EuroCave retailer
• We recommend that you fill your wine
cabinet to at least 75% of its total capacity.
Disable any unusable appliances by unplugging
them and cutting off the power lead.
Picture 1
Precautions
• Do not place your cabinet in an area liable to flood.
• Do not place your cabinet close to a source of heat or expose it to
direct sunlight
• Prevent water from splashing on any parts of the rear of the machine.
• Arrange the power lead so that it is accessible and does not come into
contact with any of the appliance's components.
• Tilt the cabinet slightly backwards in order to adjust the front feet (by
screwing or unscrewing them) so that you can level your cabinet (spirit
level recommended).
Picture 2
25
GB

Publicité

loading

Ce manuel est également adapté pour:

V-lapremiere-mV-lapremiere-sS-lapremiere-l