Publicité
Les langues disponibles
Les langues disponibles
Please note: To configure your cabinet to store magnums (see p.131), place the runners in the notches marked with
the shape opposite.
II. Assembling and using the shelf labels
The epoxy-coated steel shelf labels allow you to identify your bottles and find them
easily. White marker pen supplied in the "accessories" box (erasable).
b.
III. Assembling the supports and Main du Sommelier bottle supports
x12
6/ USING YOUR WINE CABINET FOR THE FIRST TIME
1. Connecting and starting up
After waiting 48 hours, plug in your wine cabinet.
To switch on, press and hold down the
II-A. Description
The tactile keys are very sensitive. There is no need to apply force, a light touch is sufficient to register the command. Remember to remove your finger
from the control between each press.
Warning: in service usage set between 6°-11°C and 13°-18°C the humidity alarms are not active.
A
Lighting mode adjustmentbutton (3 modes)
B
Open door indicator
C
Warning light
D
Temperature alarm
E
Compressor status light
F
Heater status light
G
Charcoal filter alarm
5/ LAYOUT – STORAGE
c.
button for 5 seconds.
A
B
C
D
E
N
x8
Have your socket checked (presence of correct sized fuses and
30 mA circuit breaker). Do not plug several cabinets into a multi-
socket adaptor.
F
G
H
I
J
set
M
H
High humidity level alarm (if flashing)
I
Low humidity level alarm
J
Confirmation and settings access key
K
Setting and selection keys
L
On/off/standby key
M
Relative humidity level display (cannot be set)
N
Temperature display
K
L
+
(filling humidity tray)
15
EN
Publicité
