Eurocave V-ROYALE-L Mode D'emploi page 27

IV. Different installations
Installing two ROYALE cabinets side by side
There is no reason why two ROYALE cabinets cannot be installed side by side.
Installing the cabinet with the back to a wall
If you place your cabinet with its back to the wall, install the stop at the top, at the back of your cabinet. It is located in the accessories bag.
T25 (not supplied)
1
Remove the screws located at the back of your cabinet, at the top,
usinga screwdriver.
Installing the cabinet in a corner
N.B.: If the cabinet is placed in a corner, the door hinge must be fitted so that it does not open more than 90°. If needed, contact your EuroCave
retailer.
T25 (not supplied)
1
Remove the screws fastening the hinge to the door using a T25
screwdriver.
12
3
Replace the screws on this new pivot fixing hole.
EN
4/ INSTALLING YOUR WINE CABINET
2
Screw the rear stop using these two same screws.
2
Move forward the hinge attachment by one notch on the right.
110°
90°