ETI EV PLUS Serie Manuel D'installation page 71

1 Introduction
This manual introduces the ETI EV PLUS Charging Line products for EV battery charging and
provides all the necessary information about their installation process and their usage.
Important: Please read carefully this manual before installing and using the charger.
Important: All the installation operations must be performed by qualified personnel
only.
1.1 General information
2.1.1 About this manual
 The present manual must be available to all the persons who take care of the charger
installation and usage
 The installation and commissioning of the charger must be performed by authorized and
qualified personnel only in compliance to all the safety related regulations and laws
 The charger producer is not responsible for any damage due to an incorrect or missing
application of the rules contained in the present manual
 Due to the continuous improvement process, the charger producer has the right to
apply changes to the product whenever needed
 The reproduction of this manual is not allowed without the written authorization by ETI
d.o.o.
2.1.2 About safety
The product conforms with the state of the art and the applicable safety and health regulations.
Nevertheless, the following risks can be caused by incorrect operations or misuse:
 Hazards to life and limb of the user or third parties
 Perils to the product and other material assets of the operator
 Risks for the efficient use of the product
It is mandatory to apply the following rules:
 The input voltage must be disconnected before any maintenance operation on the
charger.
 Please be sure the input voltage is not present by means of dedicated measures with
appropriate tools
 Before switching on the charger, the earth cable connection must be checked
 The input cables, the plugs and all the necessary accessories for the installation must be
carefully selected in compliancy with the current regulations and laws (see paragraph
6.5)
 An MGT protection device must be installed to protect the charger input (see paragraph
6.3)
 No cable adapter or patch or cord set extension is allowed for the charger cord set
1