ETI EV PLUS Serie Manuel D'installation page 40

Step Description
No.
6 The charger will now automatically connect to the WiFi
router set by the user (see par. 8.1.2 point 5), the same
router (2) to which the OCPP server (4) is eventually
connected.
8.1.4 WiFi CLIENT mode operations (OCPP support)
When connected in WiFi CLIENT mode, the charger is able to interface to the OCPP server. This
allows for network-based management solutions, both for the charger itself and its related
charging process.
Through the OCPP software platform, provided by energy companies, organizations, etc., the
charger activity is controlled and all the administrative processes, as charging authorizations,
billing, reports, can be remotely managed by the central station of the service.
The Charger supports the following OCPP 1.6 J protocol functions:
• Operations initiated by the central server:
o Remote Start Transaction
o Remote Stop Transaction
o Get Configuration
o Reset The server
o Change Availability
o Change Configuration
o Clear Cache
o Reserve Now
o Cancel Reservation
o Clear Charging Profile
o Set Charging Profile
• Operation initiated by the charge point:
o Boot Notification
o Status Notification
o Heartbeat
o Authorize
o Start transaction
o Stop transaction
o Meter values
The OCPP server address setting is specified in chapter 8.1.2, point 10.
February 2023
Picture
38