ETI EV PLUS Serie Manuel D'installation page 27

The connection to the charger can be established by a PC, tablet or smartphone.
The following steps are necessary to setup the connection between the user device (PC, tablet,
smartphone) and the charger:
Step Description
No.
1 The WiFi interface must be in
AP mode.
The Wi-Fi LED indicator on the
front panel (par. 6.1.3) is blue
coloured.
2 Scan for
networks with the connecting
device utility
Remark: some mobile phones
might require disconnection of
mobile data to successfully
connect to the EV charger via
WiFi.
February 2023
Picture
available WiFi
25