Publicité
Les langues disponibles
Les langues disponibles
Connecting the meter to the wallbox
Step
Description
5
The dynamic power
management
must be activated.
Enter in the "Load
Balancing" APP page,
under
menu.
Activate the "Enable"
option.
Set the Max Current
cursor at the same
value already used in
the step 4.
Note:
To
have
wallbox in load sharing
mode,
•
connect it to the
first one with the
CAN Bus,
•
then configure it
with
power
management
parameters
for the first one
•
set a different CAN
address, that must
be 2 instead that 1
6
Now the charger is
automatically able to
know the maximum
available power in the
system, in a real time
mode, by means of the
information
by the external meter.
As an example, let's consider the case of a maximum contractual energy equal to 3.2kW.
The charger Max Current parameter must be set to 14A.
If the other loads consumption is equal to 1kW, the charger will work with an available power
of Pcharger = 3.2 – 1 = 2.2 kW.
February 2023
Picture
mode
the
Settings
a
second
the
same
used
provided
9
Publicité
