ECOVACS ROBOTICS DEEBOT OZMO 960 Manuel D'instructions page 14

3. Operating and Programming
4
Install Side Brushes
6
Charge DEEBOT
When DEEBOT completes the cleaning cycle or when the battery gets low, DEEBOT automatically returns to the Docking Station to recharge
Note:
itself. DEEBOT can also be sent back to the Docking Station at any time by using the ECOVACS App or by pressing the AUTO Button on the robot
for 3 seconds.
Empty remaining water from the Reservoir and remove the Reservoir and the Cleaning Cloth Plate before charging DEEBOT.
14
EN
5
Power ON
= ON, = OFF.
Note: I O