Lorell LLR60126 Instructions D'assemblage page 9

STEP 11
Attach the Left Side
Panel (B) while making
sure that all the Cam Screws
(1) and Wooden Dowels (6) properly
engage with the Cam Locks (3) and
holes as provided. With a Phillips Screw Driver
rotate the cam locks 1/2 turn clockwise until snug.
DO NOT OVERTIGHTEN
Attach the Right Side Panel (C) while making sure that all Cam Screws
(1) and Wooden Dowels (6) properly engage with the Cam Locks (3)
and holes as provided. With a Phillips Screw Driver rotate the cam locks
1/2 turn clockwise until snug. DO NOT OVERTIGHTEN
Attach 2 each Double Stick Tape (2) strips to each of the bottoms of the
Left and Right Side Panels. DO NOT REMOVE THE PROTECTIVE
COVERING
STEP 12
Attach the Top Panel (A) while making sure that all
Cam Screws (1) and Wooden Dowels (6) properly engage
with the Cam Locks (3) and holes provided. With a
Phillips Screw Driver rotate the cam locks 1/2 turn
clockwise until snug. DO NOT OVERTIGHTEN
LLR60126_64850_Manual.indd 8 LLR60126_64850_Manual.indd 8
D
Left Divider
Panel
G
Upper Back
Panel
B
Left Side Panel
E
Right Divider
Panel
F
Fixed Shelf
H
Lower Back
Panel
Double Stick Tape
G
B
C
Right Side Panel
11
A
Top Panel
C
E
PAGE 8 OF 27
3/4/11 5:22 PM 3/4/11 5:22 PM