Lorell LLR60126 Instructions D'assemblage page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

STEP 13
Using the Cam Cap (4) cover all the exposed Cam
Locks (3)
Using the Large Cam Cap (5) cover the exposed
Cam Lock (3) located inside the storage area.
STEP 14
Attach the door to the unit by inserting the hinge
mechanism over the Phillips Screw and locking into
place. Using a Phillips Screw Driver, adjust the door so
that it fits squarely into the opening.
Make sure that lock properly engages into the
Right Divider (E). Adjust as needed.
Prior to attaching the Hutch to the Desk Unit,
remove the protective coating from the
Double Stick Tape (11) located at the bottom of
the Left and Right End Panels. IMMEDIATELY
PLACE UNIT IN DESIRED LOCATION!
YOU HAVE SUCCESSFULLY COMPLETED
THE INSTALLATION OF THIS UNIT!
THANK YOU FOR PURCHASING
THIS PRODUCT!
LLR60126_64850_Manual.indd 9
LLR60126_64850_Manual.indd 9
5
Large Cam
Cap
4
Cam Cap
J
Door
E
Right
Panel
Divider
Panel
PAGE 9 OF 27
3/4/11 5:22 PM
3/4/11 5:22 PM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Llr64850

Table des Matières