Lorell LLR60126 Instructions D'assemblage page 7

STEP 7
On the Upper Back Panel (G) and Lower Back Panel
(H) insert the 22 each Cam Locks (3). When inserting
the cam lock ensure that the arrow is facing toward the
cam screw entry.
On the Upper Back Panel (G) insert with a Phillips
Screw Driver 4 each Cam Screws (1) in the positions
shown on the drawing.
STEP 8
On the Fixed Shelf (F) insert the 4 each Cam Screws (1)
in the hole position shown on the drawing.
On the same side of the Fixed Shelf (F) insert with a
Rubber Mallet or Hammer 4 each Wooden Dowel (6)
in the position shown on the drawing. Tap securely into
place.
On the reverse side of the Fixed Shelf (F) insert 4 each
Wooden Dowels (6) in the position shown on the
drawing. Tap securely into place with a Rubber Mallet
or Hammer.
On the same side of the Fixed Shelf (F) insert 4 each
Cam Lock (3) in the position shown on the drawing.
When inserting the cam lock make sure that the arrow is
facing toward the cam screw entry.
LLR60126_64850_Manual.indd 6 LLR60126_64850_Manual.indd 6
1
3
G
Upper Back
Panel
3
H
Lower Back
Panel
1
F
Fixed Shelf
6
Fixed Shelf
6
3
F
PAGE 6 OF 27
3/4/11 5:22 PM 3/4/11 5:22 PM