Lorell LLR60126 Instructions D'assemblage page 8

STEP 9
Install the Left Divider Panel (D) and Right Divider
Panel (E) onto the Upper Back Panel (G) so that the Cam
Screws (1) engage with the Cam Locks (3). Note that the
CD Rack located on the Left Divider Panel (D) should be
facing outward. With a Phillips Screw Driver rotate the
cam locks 1/2 turn clockwise until snug. DO NOT
OVERTIGHTEN
STEP 10
Insert 4 each Double Cam (2) into the bottom end
of the Upper Back Panel (G).
Attach the Support Panel (I) to the Fixed Shelf (F)
so that the Wooden Dowels (6) located on the
Fixed Shelf (F) engage.
Attach the Fixed Shelf (F) unit to the Upper Back (G)
unit so that the 4 each Double Cam (2) go through the holes on the
Fixed Shelf (F). The Cam Locks (3) located on the Left Divider (D) and
Right Divider (E) should engage with the Cam Screws (1) located on the
Fixed Shelf (F)
With a Phillips Screw Driver rotate the cam locks located on the Left
and Right Divider 1/2 turn clockwise until snug. DO NOT
OVERTIGHTEN
Attach the Lower Back Panel (H) so that the Double Cam (2) on the
partially assemble unit engage with the Cam Lock (3) located on the
Lower Back Panel (H). With a Phillips Screw Driver rotate the cam
locks 1/2 turn clockwise until snug. DO NOT OVERTIGHTEN
LLR60126_64850_Manual.indd 7 LLR60126_64850_Manual.indd 7
D
Left Divider
Panel
G
Upper Back
Panel
D
Left Divider
Panel
2
E
Right Divider
Panel
F
Fixed Shelf
E
Right Divider
Panel
G
Upper Back
Panel
6
I
Support Panel
H
Lower Back
Panel
PAGE 7 OF 27
3/4/11 5:22 PM 3/4/11 5:22 PM