Lorell LLR67176 Instructions

Switching the pedestal is more easily done if the desk is still
upside-down, as shown.
Remove drawers from PEDESTAL as follows: Pull out the box drawer,
and find the tab in the slide (see detail). Move the tab up on the right
slide, down on the left slide, and slowly remove the drawer completely.
Set the drawer aside. Repeat for the file drawer.
Disconnect the PEDESTAL from the left side of desk as follows:
The PEDESTAL is connected to the DESK with (4) SILVER SCREWS
through the top, and (1) BLACK SCREW to the leg. Remove all five
screws. Also remove the (2) screws in the other (left) leg.
(See drawings and details)
Location of black screw - credenza
(inside of pedestal)
Slide PEDESTAL over as shown. Re-install the
PEDESTAL using the 5 screws.
Also screw the two BLACK SCREWS into the
Right leg as shown.
Turn the desk right side up. Carefully re-insert the drawers into
the PEDESTAL.
Your desk can be cleaned with a soft cloth and mild soap.
INSTRUCTIONS: TO SWITCH PEDESTAL FROM
LLR67176/67177, 67253/67254, 67276/67277, 67380/67381
Slide Tab - to disconnect
drawer. Move tab up to
disconnect right slide, down
to disconnect left side.
Location of black screw - desk
RIGHT SIDE TO LEFT SIDE OF DESK
(2) BLACK SCREWS go here.
Completed desk with Pedestal on
the left side.
Remove the two black
screws from front of
this leg