Lorell LLR60126 Instructions D'assemblage page 5

ASSEMBLY INSTRUCTIONS:
STEP 1
With the Top Panel (A) laying on a non-abrasive
surface, insert 9 each Wooden Dowel (6) in the posi-
tions shown on the drawing. Tap securely into place
with a Rubber Mallet or Hammer.
On the Top Panel (A) insert with a Phillips Screw
Driver 11 each Cam Screw (1) in the positions shown
on the drawing.
STEP 2
On the Left Side Panel (B) install the Left CD Rack (9)
in the position shown on the drawing with 6 each Small
Screw (12) and a Phillips Screw Driver. NOTE THE
HOLE POSITION ON THE DRAWING TO USE AS
THE GUIDE!
On the Left Side Panel (B) insert with a Rubber Mallet
or Hammer 7 each Wood Dowel (6) in the positions
shown on the drawing. Tap securely into place.
On the Left Side Panel (B) insert 7 each Cam Screw (1)
with a Phillips Screw Driver in the positions shown on
the drawing.
On the Left Side Panel (B) insert 1 each Cam Lock (3)
in the hole position shown on the drawing. When insert-
ing the cam lock make sure that the arrow is facing
toward the cam screw entry.
STEP 3
On the Left Divider (D) install the Right CD Rack (10)
in the position shown on the drawing with 6 each Small
Screw (12) and a Phillips Screw Driver. NOTE THE
HOLE POSITION ON THE DRAWING TO USE AS A
GUIDE!
On the Left Divider (D) insert 6 each Cam Lock (3) in
the hole position shown on the drawing. When inserting
the cam lock make sure that the arrow is facing toward
the cam screw entry.
LLR60126_64850_Manual.indd 4 LLR60126_64850_Manual.indd 4
A
Top Panel
9. Left CD Rack
12
Use this hole with
this hole
1
6
3
10. Right CD Rack
12
Use this hole with
this hole
D
Left Divider Panel
6
1
B
Left Side Panel
9
3
D
Left
Divider
Panel
PAGE 4 OF 27
3/4/11 5:22 PM 3/4/11 5:22 PM