Kärcher K 6.550 Mode D'emploi page 18

Operation
Description of the Appliance
These operating instructions describe the
maximum equipment. Depending on the
model, there are differences in the scopes
of delivery (see packaging).
Illustrations on fold-out
pages!
1 Coupling element for
water connection
2 High pressure connection
3 Water connection with integrated sieve
4 Appliance switch "0/OFF"/ „I/ON"
5 Dosage regulator for detergent
6 Storage for trigger gun
7 Transport handle
8 Plug 'n' Clean detergent bottle with
locking lid
9 Storage of Plug 'n' Clean detergent bot-
tle with detergent connection
10 Storage for accessories
11 Storage hook for mains connection ca-
ble
12 Mains cable with mains plug
13 Wheels
14 Trigger gun
15 Lock trigger gun
16 Key to detach the high pressure hose
from the trigger gun
17 Washing brush
18 Spray lance with Dirtblaster
19 Spray lance with pressure regulation
(Vario Power)
20 High pressure hose
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
Before Startup
Mount loose parts delivered with appliance
prior to start-up.
18
Install the storage for trigger gun
 Illustration
Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
 Illustration
Insert the top holder and push down all
the way.
Install the storage hook for the mains
connection cable
Option
 Illustration
Install the bottom storage hook.
 Illustration
Install the top storage hook.
Install the dosage regulator for
detergent
You will need the 2 included screws as well
as a Phillips screwdriver PH 2.
 Illustration
Insert both detergent hoses onto the
hose fittings.
Install the dosage regulator and con-
nect using 2 screws.
Install the transport handle
Option
 Illustration
Attach the transport handle, insert the
bolts into the bores and screw them in.
Connect the high pressure hose to the
trigger gun
Illustration
 Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nipple
is aligned correctly.
Check the secure connection by pulling
on the high pressure hose.
Warning
According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply
without a system separator. Use a
suitable system separator manufactured by
KÄRCHER; or, as an alternative, a system
separator as per EN 12729 Type BA. Water
flowing through a system separator is con-
sidered non-drinkable.
– 8
EN
Water supply