Benning ST 710 Notice D'emploi page 17

Appliance tester for safety-related testing of portable electrical devices and equipment
- testing according to DIN VDE 0701-0702, ÖVE/ ÖNORM E 8701
- testing of cable reels, multiple distributors and IEC power cords
- voltage measurement on external shock-proof socket
Table of contents
1. User notes
2. Safety note
3. Scope of delivery
4. Unit description
5. General information
6. Ambient conditions
7. Electrical specifications
8. Measuring with the BENNING ST 710
9. Maintenance
10. Environmental note
1. User notes
These operating instructions are intended for
- qualified electricians, competent persons and
- electrotechnically trained persons
The BENNING ST 710 is intended for making measurements in dry environment. It must not be
used in power circuits with a nominal voltage higher than 300 V AC (More details in Section 6.
"Ambient conditions").
The following symbols are used in these operating instructions and on the BENNING ST 710:
Application around and removal from HAZARDOUS LIVE conductors is permitted.
Warning of electrical danger!

Indicates instructions which must be followed to avoid danger to persons.
Important, comply with the documentation!

The symbol indicates that the information provided in the operating instructions must
be complied with in order to avoid risks.
This symbol on the BENNING ST 710 means that the BENNING ST 710 is totally

insulated (protection class II).
This symbol on the BENNING ST 710 means that the BENNING ST 710 complies
with the EU directives.
This symbol appears on the display to indicate a discharged battery.

(AC) Alternating voltage or current.
Ground (Voltage against ground).
07/ 2018
Operating instructions
BENNING ST 710
BENNING ST 710

11