Xerox WorkCentre 4118 Guide D'initiation Rapide page 27

quick_use.book Page 25 Thursday, March 2, 2006 9:38 AM
Enabling a Confirmation Page
3
Press [Machine Status] on the Control Panel.
Using the Navigation Keys, select [Fax Setup] and press [Enter].
Using the Navigation Keys select [MSG Confirm] and press [Enter].
Using the Navigation Keys select [ON] and press [Enter].
A confirmation page will print after each Fax transmission.
Sending a Fax
4
Load an original into the
Document Feeder or place
face-down on the Document
Glass.
Press the [Fax] key to
activate Fax mode.
Enter the destination fax
number using the Numeric
Keypad on the machine.
Press Start to send the fax.
Load an original into the Document Feeder or place face-down on the
Document Glass.
Press the [Fax] key to activate Fax mode.
Press the [Manual Dial] key and listen for the dial tone.
Use the telephone keypad to enter the destination fax number.
Press Start when you hear the high-pitched fax signal.
Lighten/
Darken
2 Sided
Color
Original
or
25
Fax Key
Original Type
Resolution