Xerox WorkCentre 4118 Guide D'initiation Rapide page 17

quick_use.book Page 15 Thursday, March 2, 2006 9:38 AM
6
When the setup has completed
click [Finish].
7
Plug the USB cable into the
WorkCentre 4118 and connect it
to your Personal Workstation
(PC).
The Hardware Wizard will search
for and find the drivers.
If the Hardware Wizard prompts you, follow the instructions provided.
Two modes of USB operation are provided, Fast and Slow. Some PC user's may experience
poor functionality in the default 'Fast' mode, if this occurs select the Slow mode.
Information on changing USB modes can be found in the Help List, which can be printed by
following the instructions that appear on page 31 of this document.
15