Step 2. Install The Software; Step 3. Connect The Tma Cable - HP Scanjet G4000 Serie Guide D'installation Et D'assistance

Step 2. Install the software

Caution
connect the USB cable to the computer yet. Install the scanning software
before connecting the USB cable. If you are installing the software into a
Macintosh computer, you can connect the USB cable either before or after
installing the software.
1. Insert the HP Photosmart CD that came with the scanner into the computer CD
drive.
For Windows installations: Wait for the installation dialog box to display. If the
installation dialog box does not display after a few moments, see Scanner
installation troubleshooting on page 12.
For Macintosh installations: Double-click on the CD icon that appears on the
desktop, and then double click on the HP Scanjet Scanner Install icon to start the
installation.
2. Click Install software to install the scanning software. Follow the onscreen
instructions to complete the scanning software installation.

Step 3. Connect the TMA cable

➔ Connect the TMA cable from the lid to the scanner base.
Setup and Support Guide
If you are installing the software onto a Windows computer, do not
5