Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8732315
6.
Restore the oil filler screw. Close the release valve by turning clockwise.
7.
Test the ram several times for proper operation before putting it into use.
Do not use the ram if it still does not appear to be working properly. Have
a qualified service technician service or repair the hydraulic system.
FLUSHING THE VALVE
Contaminants may block the release valve, causing issues when attempting to
lower a load. Clear the valve with the following steps.
1.
Lower the ram and securely close the release valve.
2.
Manually lift the ram several inches.
3.
Open the release valve and force the ram down as quickly as possible.
LUBRICATION
Clean and lubricate all moving parts.
Lubricate the grease fitting with a grease gun once a month or when the boom
becomes difficult to swivel on the post.
HYDRAULIC FLUID DISPOSAL
Do not drain hydraulic oil into the sewer system or dispose in an uncontrolled
location. Hydraulic fluid may take more than a year to breakdown in the
environment and the ingredients may still be toxic. Contact your local
municipality for proper disposal instructions or locations.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
DO NOT pollute the environment by allowing uncontrolled discharge of
waste oil.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
www.princessauto.com / 1-800-665-8685
TRUCK MOUNT CRANE
V1.0
Page 20
Publicité
Table des Matières
