Power Fist 8732315 Mode D'emploi page 5

V1.0
3. Do not allow untrained persons to operate the crane.
4. Use the crane for lifting only. Do not work under a load that is supported
only by the crane.
5. Stabilize the load. Ensure that the load remains stable at all times. Lift
deadweight only.
6. Know the weight of the load being lifted. DO NOT overload the crane
beyond the rated capacity of each specified boom position. Overloading
can cause damage or failure of the crane.
7. The vehicle with the crane should be on a level surface capable of
sustaining the weight of the vehicle and load. Use of the crane on other
than level surfaces can result in crane instability and possible loss of load
or tipping of the vehicle.
8. Make sure there is enough clearance around the crane and the load for
movement.
9. Never attempt to use the crane unless it is properly filled with hydraulic
fluid. Do not use brake fluid or any other improper fluid and avoid mixing
different types of oil when adding hydraulic oil.
10. Inspect the tool before each use. DO NOT use if bent, broken, cracked,
leaking, otherwise damaged, if any suspect parts are noticed or it has
been subjected to a shock load.
11. Check to ensure that all applicable bolts and nuts are firmly tightened.
12. Store the crane with the boom fully lowered, winch cable retracted,
hydraulic ram valve closed and position the boom over the vehicle's wheel
well when storing or driving.
JACK PRECAUTIONS
1. Do not use a handle extension for the jack handle.
2. Make sure the load is stable, so it does not shift when lifting or lowering.
3. Ensure that there are no obstructions under the load and that the area is
clear before lowering the device.
4. Lower the load in a slow and controlled manner to prevent shock loading.
Shock loading may cause to fail and lead to property damage and/or
severe personal injuries.
LIFTING PRECAUTIONS
1. Do not exceed the maximum capacity to prevent equipment failure or
damage.
Page 5
TRUCK MOUNT CRANE
www.princessauto.com / 1-800-665-8685
8732315