Subaru H001SXC300 Instructions D'installation page 4

4
VEHICLE PREPARATION, continued
8. Using a panel removal tool, carefully remove the right side
dashboard panel by starting at the bottom and working
upward to disengage six (6) pressure clips. (FIGURE H)
9. Using a panel removal tool, carefully remove the passenger’s
side ornament panel by lifting upward to disengage eight (8)
pressure clips and then pulling toward the rear of the vehicle.
(FIGURE I)
10. Using a Phillips screwdriver, remove six (6) Phillips screws
securing the glove box inner cover. Disengage the six (6)
pressure clips and disconnect the glove box lamp connector
to remove the glove box inner cover. (FIGURE J)
PART NUMBER
ISSUE
H001SXC300
DATE
-
24 May 2022
FIGURE H
FIGURE I
FIGURE J
SUBARU OF AMERICA
4 OF 14