Télécharger Imprimer la page

Beko FSE1174N Manuel D'utilisation page 23

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 55
7
Troubleshooting
Please review this list before calling
the service. It will save your time and
money. This list includes frequent
complaints that are not arising
from defective workmanship or
material usage. Some of the features
described here may not exist in your
product.
The refrigerator does not operate.
• The plug is not inserted into the socket
correctly. >>>Insert the plug into the socket
securely.
• The fuse of the socket which your
refrigerator is connected to or the main fuse
have blown out. >>>Check the fuse.
Condensation on the side wall of the
fridge compartment (MULTIZONE,
COOL CONTROL and FLEXI ZONE).
• Door has been opened frequently. >>>Do
not open and close the door of refrigerator
frequently.
• Ambient is very humid. >>>Do not install
your refrigerator into highly humid places.
• Food containing liquid is stored in open
containers. >>>Do not store food with
liquid content in open containers.
• Door of the refrigerator is left ajar.
>>>Close the door of the refrigerator.
• Thermostat is set to a very cold level.
>>>Set the thermostat to a suitable level.
Compressor is not running
• Protective thermic of the compressor
will blow out during sudden power failures
or plug-out plug-ins as the refrigerant
pressure in the cooling system of the
refrigerator has not been balanced yet. The
refrigerator will start running approximately
after 6 minutes. Please call the service if the
refrigerator does not startup at the end of
this period.
• The fridge is in defrost cycle. >>>This is
normal for a full-automatically defrosting
refrigerator.
periodically.
• The refrigerator is not plugged into the
socket. >>>Make sure that the plug is fit
into the socket.
• Temperature settings are not made
correctly.
>>>Select
temperature value.
• There is a power outage. >>>Refrigerator
returns to normal operation when the
power restores.
The operation noise increases when
the refrigerator is running.
• The operating performance of the
refrigerator may change due to the changes
in the ambient temperature. It is normal and
not a fault.
25
EN
Defrosting
cycle
the
occurs
suitable

Publicité

loading