Table des Matières
Publicité
• Use the correct tool. Do not overstrain the tool or ac-
cessory. You get a better result with the correct tool or
accessory.
• Wear suitable clothing: Loose clothing or gloves, ties,
rings, arm-bands or other ornaments can get entangled
in rotating components. Skid-free shoes are recommen-
ded. Protect long hair with a net.
• Always wear protective goggles (corresponding to ANSI
Z87.1). A normal pair of glasses cannot provide ade-
quate protection. In dusty environments, use a face- or
dust mask.
• Never lose your balance. Always remain secure with
both feet planted firmly on the ground.
• Keep your machine in top condition. To achieve the
best and safest output, keep the tools sharp and clean.
Follow the instructions on lubrication and tool change.
• Disconnect the machine from the mains before under-
taking maintenance or adjustment jobs.
• Use recommended spare parts only. Use of tools or ac-
cessories not recommended by the dealer can lead to
the risk of physical injury.
• Reduce the risk of unintended activation. Before inser-
ting the power plug into the mains socket, please ensu-
re that the switch Is in the Off position.
• Before working at the machine, please check for dama-
ged parts. A damaged protection device or some other
part must be checked carefully to ensure that it is wor-
king properly and performing the intended function.
Check the alignment of moving parts, breaking points,
installation or other such conditions that could affect
the function adversely. A damaged protection device or
some other part must be repaired properly or replaced.
• Do not leave the running machine unsupervised.
Switch off the power supply. Leave the machine only
after it comes to a complete standstill.
• Never work at the machine under the influence of
drugs, alcohol or medicaments.
• Ensure that the machine is disconnected from the
mains when you install, connect or shut down the mo-
tor.
• Tile parts lying around can affect your health adversely.
Operate the machine at well-ventilated places and en-
sure effective waste disposal.
Keep these specifications intact at a safe place.
65
Publicité
Table des Matières
