Table des Matières
Publicité
• The safety-, workplace- and maintenance specifica-
tions of the manufacturer as well as the dimensions
specified in the technical data must be observed.
• The applicable accident prevention measures and the
other generally recognized technical safety rules must
be observed.
• The machine must be used, serviced or repaired only
by persons who are familiar with it and who have be-
en briefed about its risks. Arbitrary alterations to the
machine will make the liability of the manufacturer for
damages resulting there from null and void.
• The machine may be used only with original accesso-
ries and original tools of the manufacturer.
Despite proper use, certain residual risk factors cannot be
eliminated fully. The following things can occur, depen-
ding on the design and structure of the machine:
• Intervention in the running diamond cutting disc.
• Contact with the diamond cutting disc in exposed area.
• Ejection of work pieces and work piece components.
• Ejection of a faulty diamond attachment in the cut-
ting disc.
• Hearing damage due to non-use of the required hea-
ring protection.
• Injuries to the eyes due to non-use of eye protection
Any use beyond the one specified will be treated as im-
proper. The manufacturer will not be liable for damages
resulting from such improper use; the risk will be borne
by the user alone.
m Residual risks
The machine is built according to the latest technology and
the recognized technical safety-related rules. Nevertheless,
individual residual risks can occur during operation.
• Danger of Injury to fingers and hands from the running
tool if it is used incorrectly.
• Risk to health from steel chips. Wear personal protec-
tion equipment such as eye protection without fail.
• Injuries due to defective diamond cutting disc. The
diamond cutting disc must be checked regularly for
physical integrity.
• Risk of injury to fingers and hands during cutting disc
replacement. Wear appropriate working gloves.
• Risk of injury during machine activation from sudden
start of cutting disc.
• Risk from power while using improper electric con-
necting cables.
69
Publicité
Table des Matières
