Scheppach fs 850 Traduction Du Manuel Original page 73

• Define all machine settings only when it is switched
off.
• Do not leave the machine unattended as long as it is
running.
• During shutdown, leave the machine only after it co-
mes to a complete standstill.
• Always switch the machine off before pulling out the
power plug from the mains socket.
• Always pull out the power plug. Never disconnect the
power plug from the mains socket by pulling at the
cable.
• Do not use cutting discs that do not meet the size
specifications.
• Do not carry the machine by the cable.
Do not work with the machine if you are not sure whether
a working condition is safe of unsafe.
EQUIPMENT FIG.1-2
1 Machine head
2 Base frame
3 Legs
4 Tub
5 Alu. table
6 Angled stop
7 Stop rails
8 Guide rails
9 Cutting disc protection
10 Diamond cutting-disc
11 Handle
12 Star knob screw for angle adjustment
13 Pin for transport lock
14 Cooling water pump
15 Hose
16 Motor
17 ON/OFF switch
18 Angle scale
19 Table extension
20 Saw blade protection
73