Brita PURITY Quell ST Mode D'emploi page 25

•
The pressure vessel and the pressure vessel lid of the filter systems have a service life of up to
ten years (from the date of installation), provided that they are installed and used correctly and the
operating conditions outlined in the Technical Data chapter are adhered to. They must always be
replaced after a maximum of ten years. The hoses must be replaced in rotation after a maximum of
five years.
• Production date:
Production code sticker filter cartridge and box, example: 1000231 D 19120020010
1000231 Article number
D Production site (Deutschland/Germany)
19 Production year, here: 2019
12 Production week, here: calendar week 12
002 Batch No. of filter medium, here the second batch filled in terms of quantity
0010 Serial number of the filter cartridge, here the tenth cartridge from the second batch
Production code sticker Display Unit (optional) - Example: 1011208E919319008764
1011208 BRITA identification number
E Supplier ID
9 Production year, here: 2019
19 Production week, here: calendar week 19
3 Production day from Monday (1) to Friday (5), here: Wednesday
19 Production year, here: 2019
008764 Serial identification number
Production date of pressure vessel and pressure vessel lid, example: 0319
03 Production month, here: March
19 Production year, here: 2019
3.5 Safety Assembly Instructions
•
The terminal device operated with the filter must be free of limescale prior to installation.
•
The filter system can also be operated downstream of water softening systems.
•
Protect the filter system from sunlight and mechanical damage. Do not assemble near sources
of heat and open flames.
•
A stop valve must be installed before the filter system intake hose.
•
If the water pressure is higher than 6.9 bar or if there are statutory requirements, a pressure
reducer must be installed before the filter system.
•
A non-return valve according to DIN EN 13959 tested by the DVGW has been factory installed
at the water intake of the filter head.
•
When choosing the material for parts that come into contact with water after the BRITA filter
system, it is important to remember that, due to the process, decarbonised water contains
free carbon dioxide. For this reason, only materials that are compatible with free carbon dioxide
must be used. We recommend the use of BRITA hoses.
•
All parts must be installed in accordance with the country-specific guidelines on the installation
of drinking water facilities.
4 Installation
Caution: Prior to installation, read the Technical Data (Chapter 12) and the Operating and Safety
!
Information (Chapter 3). After the product has been stored and transported at temperatures below
0°C, it must be stored with the original packaging open for at least 24 hours before commissioning.
EN
21