Installing the stage insert
1. When using the glass stage, make sure
that the insert is horizontal.
2. Install the stage insert in the stage open-
ing. (Fig.6)
Installing the eyepieces
Insert both eyepieces into the tubes of the
optical head. (Fig.7)
Installing the condenser
illumination unit and the LED
housing
1. Insert the condenser illumination unit into
the bracket. (Fig.8)
2. Turn the condenser illumination unit clock-
wise about 90°, with the "AS" mark of filter
holder facing forwards. Align the screw of
the condenser illumination unit and the
hole of the holder, then screw the bolt in
the hole with the supplied allen wrench.
(Fig.9)
3. Insert the connector plug into the connec-
tor jack.
4. Push the LED housing gently into the
holes of the illumination unit. (Fig.10)
All manuals and user guides at all-guides.com
Page 7
Page 7
Fig.6
Fig.7
Fig.8
Fig.9
Fig.10