Optika Italy IM-3F Manuel D'instructions page 11

Mount or replace the mercury lamp
Before replacing the bulb, please set the fluo-
rescence power supply to (OFF) position and
unplug the power cable. Be sure that the lamp
has completely cooled down.
①
Loosen the lock-screw
and take off the bulb holder
③
lock screw and take off the plastic pole
(Fig.25)
The HBO lamp has 2 poles of different dimen-
sions, so that it fits in only one direction: insert
the anode pole (bigger one) into the fixed hold-
①
er and the other pole in the flexible holder.
Then tighten the screw. (Fig.26)
Mount the lamp door back in place and tighten
the door locking screw.
All manuals and user guides at all-guides.com
(Fig.24) completely
②
. Loosen the
④
.
②
Page 11
①
Fig.24
④
③
Fig.25
①
Fig.26