Rivacold BEST W R290 Notice D'instructions page 109

EN
5. Installation
CAUTION!: the installation of electrical components inside the refrigeration coldroom falls entirely
under the responsibility of the end user. Only use suitable materials for the types of risks, in
compliance with the laws in force.
5.7.2 Procedure
1. Secure the retainer [A] on the door of the
refrigeration coldroom [B], positioning it about 10
mm from the leaf and checking the correct
positioning during the installation stage.
5.8 Connect the packaged unit to the electrical mains
5.8.1 Safety
DANGER! Electrocution. Always use adequate equipment and accessories and follow the
connection warnings given in this instruction manual.
5.8.2 Connect the packaged unit
1. See "Requirements for the connection to the electrical mains" on page 101.
2. Once connected, the display lights up.
5.8.3 Connect the coldroom light
Wire the coldroom light by connecting it with the preset cable for connection to the packaged unit.
5.9 Work area and operational tasks
5.9.1 Required skills
Operator
108
BEST W R290
2. Secure the door switch [C].
Note: according to the type of refrigeration
coldroom, choose the best installation position and
method.
Instruction manual
Rev.
v. 00 | 9600-0033 © 2020 RIVACOLD srl
|