Hella Jumbo 320 Xenon Instructions De Montage page 13

Page 6
Replacing the Xenon lamp
Dismantling:
· Rotate the firing device in the
counterclockwise direction (Caution-
plug gets loosened automatically).
· Pull off the firing device
· Open the retaining spring
· Remove the lamp
Mounting:
· Insert the lamp
· Close the retaining spring
· Install the firing device and rotate it
13
clockwise till it gets stopped
· Connect the plug with the firing
device
The replaced Xenon lamp must be
disposed of as special waste.
Check the functioning and setting of
the headlamps.
Have the driving lamps adjusted in
a specialist automobile workshop
or gas station.
Only correctly adjusted headlamps
provide optimum light.
One more tip:
Keep the headlight lenses clean.
Dirt can absorb up to 80% of lighting
power,
Do you have spare lamps and fuses
in the car?
If you have any questions or
problems with fitting: call Hella
Customer Service.