SCANGRIP Canvik One Instructions D'utilisation page 7

Maintenance and Cleaning
•
Always keep the unit clean.
•
For all inquiries and spare parts ordering, please include the serial
number in all cases.
•
Grease the guide spindle if necessary, however at least every six
months. Clean the spindle before greasing.
Recommended grease: graphite grease.
Replacing the Safety Pin, Fig.C.5
•
Overloading of the spindle will result in the safety pin breaking.
Whilst the handle will still rotate, the spindle remains in its last posi-
tion ensuring the spring remains compressed. Replace the safety
pin as described.
•
Remove the handle.
•
Drive out the broken pin with a drift pin.
•
Refit the handle and align the drilling of the spindle and the handle
and drive in a new safety pin (5x30 mm + 3x30 mm, ISO8752).
Guarantee
This tool carries a guarantee according to current law.
Subject to change without notice